Inovance MD380-5T5.5GB - Chapter 3 Mechanical and Electrical Installation; Mechanical Installation

Mechanical and Electrical Installation MD380 User Manual
- 30 -
Chapter 3 Mechanical and Electrical Installation
3.1 Mechanical Installation
3.1.1 Installation Environment Requirements
Item Requirements
Ambient temperature
-10°C to +50°C
Heat dissipation
Install the A
C drive on the surface of an incombustible object, and
ensure that there is suf¿cient space around for heat dissipation.
Install the AC drive vertically on the support using screws.
Mounting location
)ree from direct sunlight, high humidity and condensation
)ree from corrosive, explosive and combustible gas
)ree from oil dirt, dust and metal powder
Vi
bration
Less than 0.6 g
)ar away from the punching machine or the like
Protective enclosure
The MD380 series A
C drives of plastic housing are the whole unit
built-in products operated through remote control and need to be
installed in the ¿nal system.The ¿nal system must have the required
¿reproof cover, electrical protective cover and mechanical protective
cover, and satisfy the regional laws & regulations and related IEC
requirements.
3.1.2 Installation Clearance Requirements
The clearance that needs to be reserved varies with the power class of the MD380, as
VKRZQLQWKHIROORZLQJ¿JXUH
)LJXUH&OHDUDQFHDURXQGWKH0'IRULQVWDOODWLRQ
The AC drive shall be installed vertically upward .
B
B
A
A
MD380
Hot air
Cold air
0.4 í 15 kW A  10 mm % 100 mm
18.5 í 22 kW A  10 mm % 200 mm
22 í 37 kW A  50 mm % 200 mm
37 í 630 kW A  50 mm % 300 mm
Installation clearance requirements on
the MD380 series AC drives of different
power classes
Power Class Clearance Requirements
efesotomasyon.com