Inovance MD500-EN1 - Page 26

5 Communication Examples
- 25 -
Keep clicking Next before the 󶍾nish button shows and then click Close.
Step 3: Set the IP address of the expansion card, herein, take the static IP address as an
example.
Set FD-37 – FD-49 to 0, 192.168.0.6, 255.255.255.0, and 192.168.0.1 respectively.
Step 4: Con󶍾gure Studio5000 project.
Choose Ethernet > New Module with left mouse button on the left navigation pane.
、