Unpacking and Transportation
‑58‑
Note
Dispose of the packaging materials in accordance with applicable local regulations.
3.5 Transportation and Lifting After Unpacking
T1 to T6 models are small and light and therefore can be handled manually. T7 to T13
models, however, must be transported with an appropriate lifting tool.
Weight of AC Drive Number of Persons Required
< 15 kg
1
≥ 15 kg > 2; with an appropriate lifting device
Precautions for transportation and lifting:
● Comply with local regulations.
● Avoid handling the AC drive by directly holding its upper access cover or
enclosure. Before moving it, check that all screws have been tightened. Failure to
comply may result in physical injury by the AC drive falling because of loose
screws.
● For T10 to T12 models, when fastening the AC drive, ensure that the four backplate
mounting holes on the back of the AC drive are securely connected to the fixing
beam.
● Erect the AC drive that is lying flat before lifting or moving it.
● Use a crane whose carrying capacity is greater than the weight of the AC drive,
where appropriate.
● Before a vertical lift, check that all components of the AC drive including the upper
access cover and terminals have been securely fixed with screws. Failure to
comply may result in physical injury due to falling of the AC drive.
● When lifting the AC drive with a lifting rope, avoid subjecting the AC drive to
excessive vibration or impact. Failure to comply may result in physical injury due
to falling of the AC drive.
● When lifting the AC drive with a lifting rope, do not turn the AC drive or leave it
suspended a long time. Failure to comply may result in physical injury due to
falling of the AC drive.
T1 to T9 models
Lifting steps for T1 to T9 models:
1. Attach the hooks of the lifting rope to the two auxiliary eye bolts at the top of the
AC drive.
To Next Page
Loading...
