Inovance MD500T75G - Control Performance

MD500 User Manual 7. Description of Parameters

7.5 Control Performance
9)&XUYH
Ƶ
/LQHDU0XOWLSRLQWDQG6TXDUH9)&XUYH
Function Code Parameter Name Setting Range Default
F3-00 9)FXUYHVHWWLQJ /LQHDU9)
0XOWLSRLQW9)
6TXDUH9)
9)FRPSOHWHVHSDUDWLRQ
9)KDOIVHSDUDWLRQ
0
F3-01 Torque boost À[HGERRVW
0.1% to 30%
Model
dependent
F3-02 Cut-off frequency of torque boost 0.00 Hz to max. frequency 50.00 Hz
F3-03 0XOWLSRLQW9)IUHTXHQF\ 0.00 Hz to F3-05 0.00 Hz
F3-04 0XOWLSRLQW9)YROWDJH 0.0% to 100.0% 0.0%
F3-05 0XOWLSRLQW9)IUHTXHQF\ F3-03 to F3-07 0.00 Hz
F3-06 0XOWLSRLQW9)YROWDJH 0.0% to 100.0% 0.0%
F3-07 0XOWLSRLQW9)IUHTXHQF\ F3-05 to rated motor frequency (F1-04) 0.00 Hz
F3-08 0XOWLSRLQW9)YROWDJH 0.0% to 100.0% 0.0%
1. *HQHUDOFRQVWDQWWRUTXHOLQHDU9)FXUYH
)LJXUH*HQHUDOFRQVWDQWWRUTXHOLQHDU9)FXUYH
Output frequency
Output voltage
F1-02
(Rated voltage)
F1-01
(Rated frequency)
F3-01
(Torque boost)
The output voltage and the output frequency change linearly when below the rated frequency. It is applicable to general
mechanical drive applications, such as large-inertia fan acceleration, punching machine, centrifuge and water pump.
efesotomasyon.com