Inovance MD500T75G - Page 237

MD500 User Manual 8. Interfaces and Communication
- 237 -
Function Code Parameter Name Setting Range Default
Fd-05 Communication protocol 0: Non-standard Modbus protocol
1: Standard Modbus protocol
0
Fd-05 = 1: Standard Modbus protocol
Fd-05 = 0: For the read command, the slave returns an additional byte. For details, see "Data Format" in this appendix.
Function Code Parameter Name Setting Range Default
FD-06 Current resolution read
by communication
0: 0.01 A
1: 0.1 A
0
This parameter is used to set the unit of the output current read by communication.
efesotomasyon.com