Installation
‑62‑
Figure 5‑18 Installing the bottom mounting bracket
Drill holes for the mounting bracket and assemble the bracket on site if the cabinet is not a
nine‑fold profile one.
3. Assemble the guide rails (model: MD500‑AZJ‑A3T10) and mount them on the
cabinet.
a. Assemble the guide rails, as shown in "
Figure 5–19
"
on page 62
.
Figure 5‑19 Assembling guide rails
b. Align the two round holes on the front end of the guide rails with the screws of
the mounting bracket, and lock them with two M6 nuts, to mount the guide rails
on the cabinet, as shown in "
Figure 5–20
"
on page 63
.
To Next Page
Loading...
