Inovance MD800 Series - Page 160

Para.
No.
Address
Name
Value Range
Default
Unit
Change
Page
F5-12 62732
DO3/RO3 output delay
0.0s to 3600.0s 0.0 s At once
“
F5-12 ”
on page
265
F5-13 62733
DO4/RO4 output delay
0.0s to 3600.0s 0.0 s At once
“
F5-13 ”
on page
265
F5-14 62734
DO5/RO5 output delay
0.0s to 3600.0s 0.0 s At once
“
F5-14 ”
on page
265
F5-15 62735
DO/RO active mode
Ones:
0: Positive logic
1: Negative logic
Tens:
0: Positive logic
1: Negative logic
Hundreds:
0: Positive logic
1: Negative logic
Thousands:
0: Positive logic
1: Negative logic
Ten thousands:
0: Positive logic
1: Negative logic
0 - At once
“
F5-15 ”
on page
265
F6-00 62976
Start Modes
0: Direct start
1: Flying start (asynchronous motor)
2: Pre-excitation start (asynchronous
motor)
0 - At once
“
F6-00 ”
on page
266
F6-01 62977
Speed tracking mode
0: From stop frequency
1: From 50 Hz
2: From the maximum frequency
3: Fast flying start
0 -
At stop
“
F6-01 ”
on page
267
F6-02 62978
Speed of speed tracking
1 to 100 20 - At once
“
F6-02 ”
on page
267
F6-03 62979
Startup frequency
0.00 Hz to 10.00 Hz 0.00 Hz At once
“
F6-03 ”
on page
267
F6-04 62980
Startup frequency hold
time
0.0s to 100.0s 0.0 s
At stop
“
F6-04 ”
on page
267
F6-05 62981
DC braking current/Pre-
excitation current at
startup
0% to 100% 0 %
At stop
“
F6-05 ”
on page
268
F6-06 62982
DC braking time/pre-
excitation time at startup
0.0s to 100.0s 0.0 s
At stop
“
F6-06 ”
on page
268
List of Drive Unit Parameters
-159-