Inovance MD800 Series - Page 108

Commissioning and Trial Run
‑107‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
FC‑29 64541 Acceleration/
Deceleration time of
PLC reference 5
0–3 0 ‑ Modifiable
in any states
FC‑30 64542 Running time of PLC
reference 6
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states
FC‑31 64543 Acceleration/
Deceleration time of
PLC reference 6
0–3 0 ‑ Modifiable
in any states
FC‑32 64544 Running time of PLC
reference 7
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states
FC‑33 64545 Acceleration/
Deceleration time of
PLC reference 7
0–3 0 ‑ Modifiable
in any states
FC‑34 64546 Running time of PLC
reference 8
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states
FC‑35 64547 Acceleration/
Deceleration time of
PLC reference 8
0–3 0 ‑ Modifiable
in any states
FC‑36 64548 Running time of PLC
reference 9
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states
FC‑37 64549 Acceleration/
Deceleration time of
PLC reference 9
0–3 0 ‑ Modifiable
in any states
FC‑38 64550 Running time of PLC
reference 10
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states
FC‑39 64551 Acceleration/
Deceleration time of
PLC reference 10
0–3 0 ‑ Modifiable
in any states
FC‑40 64552 Running time of PLC
reference 11
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states
FC‑41 64553 Acceleration/
Deceleration time of
PLC reference 11
0–3 0 ‑ Modifiable
in any states
FC‑42 64554 Running time of PLC
reference 12
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states
FC‑43 64555 Acceleration/
Deceleration time of
PLC reference 12
0–3 0 ‑ Modifiable
in any states
FC‑44 64556 Running time of PLC
reference 13
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states
FC‑45 64557 Acceleration/
Deceleration time of
PLC reference 13
0–3 0 ‑ Modifiable
in any states
FC‑46 64558 Running time of PLC
reference 14
0.0s (h) to 6553.5s (h) 0.0 s (h) Modifiable
in any states