Inovance MD800 Series - Page 63

Commissioning and Trial Run
‑62‑
Parameter
No.
Communication
Address
Parameter Name Setting Range Default Unit Property
U2‑11 29195 Power supply unit I/O
‑ DO output
0–65535 0 ‑ Modification
prohibited
U2‑12 29196 Local ‑ AI1 input
(before correction)
‑10.000 V to +10.000 V 0.000 V Modification
prohibited
U2‑13 29197 Local ‑ AI2 input
(before correction)
‑10.000 V to +10.000 V 0.000 V Modification
prohibited
U2‑14 29198 Local ‑ AI1 input (after
correction)
‑10.00 V to +10.00 V 0.00 V Modification
prohibited
U2‑15 29199 Local ‑ AI2 input (after
correction)
‑10.00 V to +10.00 V 0.00 V Modification
prohibited
U2‑20 29204 Power supply unit I/O
‑ use condition of DI1
by drive unit
0–8 0 ‑ Modification
prohibited
U2‑21 29205 Power supply unit I/O
‑ use condition of DI2
by drive unit
0–8 0 ‑ Modification
prohibited
U2‑22 29206 Power supply unit I/O
‑ use condition of DI3
by drive unit
0–8 0 ‑ Modification
prohibited
U2‑23 29207 Power supply unit I/O
‑ use condition of DI4
by drive unit
0–8 0 ‑ Modification
prohibited
U2‑24 29208 Power supply unit I/O
‑ use condition of DI5
by drive unit
0–8 0 ‑ Modification
prohibited
U2‑25 29209 Power supply unit I/O
‑ use condition of DI6
by drive unit
0–8 0 ‑ Modification
prohibited
U2‑26 29210 Power supply unit I/O
‑ use condition of DI7
by drive unit
0–8 0 ‑ Modification
prohibited
U2‑27 29211 Power supply unit I/O
‑ use condition of DI8
by drive unit
0–8 0 ‑ Modification
prohibited
U2‑30 29214 Power supply unit I/O
‑ use condition of AI1
by drive unit
0–2 0 ‑ Modification
prohibited
U2‑31 29215 Power supply unit I/O
‑ use condition of AI2
by drive unit
0–2 0 ‑ Modification
prohibited
U2‑40 29224 Power supply unit I/O
‑ use condition of DO1
by drive unit
0–8 0 ‑ Modification
prohibited