Inovance MD880-01S-0751-4 - Page 84

4 HCU Control Module
- 83 -
Name Model Function
Connection
Method
Dimensions
(Length x Width x
Height, mm)
I/O module HIO-10
Two AIs
Two AOs
Two DIOs
One relay output
SLOT 105 x 73 x 24
PROFIBUS module HDP-10
PROFIBUS-DP bus
adaptation
SLOT 75 x 73 x 24
CANbus module HCAN-10 CANopen bus adaptation SLOT 75 x 73 x 24
MODBUS RTU
module
HMBA-10
MODBUS RTU bus
adaptation
SLOT 75 x 73 x 24
Ethernet Module HETN-10
Ethernet commissioning
module
SLOT 75 x 73 x 24
PROFINET I/O
module
HPFN-10
PROFINET I/O Industrial
Ethernet
SLOT 75 x 73 x 24
MODBUS TCP
module
HMBT-10
MODBUS TCP industrial
Ethernet
SLOT 75 x 73 x 24
Optical 󶍾ber
expansion module
HOFM-10
One pair of 50 M optical
󶍾ber cables
SLOT 75 x 73 x 24
HOFM-30
Three pairs of 50 M optical
󶍾ber cables
SLOT 75 x 73 x 24
Parallel control
module
HPCU-40
Support 2 to 4 parallel
modules
Optical 󶍾ber 232 x 86 x 40
HPCU-60
Support 2 to 6 parallel
modules
Optical 󶍾ber 232 x 86 x 40
HPCU-A0
Support 2 to 10 parallel
modules
Optical 󶍾ber 232 x 86 x 40
Expansion module HESD-10
Expand one SLOT
expansion slot
Optical 󶍾ber 105 x 75 x 70
SOP
SOP-20-
880
HMI RS485 150 x 100 x 30
NOTE
◆
The HOFM-30 can only be installed in SLOT1 or SLOT2.
◆
HDP-10 is recommended to be installed in SLOT3.