EasyManua.ls Logo

Inovance Monarch NICE-L-C-2003 - Page 104

Inovance Monarch NICE-L-C-2003
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 103 -
4 Parameter Description
4
Parameter
No.
Parameter Name Setting Range Default Unit
Property
F6-43
Attendant function
selection
Bit0: Calls cancelled after entering
attendant state
Bit1: Not responding to hall calls
Bit2: Attendant/Automatic state
switchover
Bit3: Door close at jogging
Bit4: Automatic door close
Bit5: Buzzer tweeting at intervals
in attendant state
Bit6: Buzzer tweeting at intervals
in attendant state
Bit7: Car call button blinking to
prompt
128 -
ā˜…
F6-43 is used to select the attendant-related elevator functions. Each bit of the parameter denes a function, as
described in the following table.
If a bit is set to 1, the function indicated by this bit is enabled; if this bit is set to 0, the function is disabled. For
details on how to view and set this parameter, see the descriptions in section 8.21.1.
The functions dened by the binary bits of F6-43 are described in the following table.
Bit Function Description Default
Bit0
Calls cancelled after
entering attendant state
All car calls and hall calls are cancelled after the system enters the
attendant state for the rst time.
0
Bit1
Not responding to hall
calls
The car blinks inside, prompting there is a hall call, but the system
does not respond.
0
Bit2
Attendant/Automatic state
switchover
If this function is enabled, the setting of F5-00 is valid. 0
Bit3 Door close at jogging
The elevator door closes after the attendant presses the door
close button manually.
0
Bit4 Automatic door close
It is the same as the normal state. After the door open holding time
is reached, the door closes automatically.
0
Bit5
Buzzer tweeting at
intervals in attendant
state
When the hall call oor and the car call oor are different, the
buzzer tweets 2.5s at intervals.
0
Bit6
Continuous buzzer
tweeting in attendant
state
When the hall call oor and the car call oor are different, the
buzzer tweets continuously.
0
Bit7
Car call button blinking to
prompt
When the hall call input is active, the car call button for the
corresponding oor blinks to give a prompt.
0

Other manuals for Inovance Monarch NICE-L-C-2003

Related product manuals