1
INOVANCE TECHNOLGY EUROPE GmbH
SV660N Startup Procedure_EN_v1.4_20220826.docx
6.6.3 ETUNE
ETune is a wizard-type function designed to guide users to perform auto-tuning by setting the motion profile
and the desired response level. After the motion profile and the response level are set, the servo drive will
perform the auto-tuning to obtain the optimal gain parameters. The auto-tuned parameters can be saved and
exported as a recipe for use in other devices of the same model.
The ETune function is intended to be used in applications featuring slight load inertia changes.
To Next Page
Loading...
