15
INOVANCE TECHNOLGY EUROPE GmbH
SV660N Startup Procedure_EN_v1.4_20220826.docx
Use the low frequency resonance suppression function to suppress such vibration. Trace the position following
error waveform using the oscilloscope function in INOVANCE software tool and calculate the position following
error fluctuation frequency, which is the low-frequency resonance frequency. Next, input H09-38 (or H09-44)
and H09-49 manually, and keep the values of other parameters to their default values. Observe the suppression
effect after using the low frequency resonance suppression filter.
Example: position following error frequency 74.7ms = 13.38Hz
Vibration suppression ON → H09-38=13.4Hz and H09-49=13.4Hz
To Next Page
Loading...
