• Insight workstation should not be placed close to or stacked with other
equipment. If they must be used close to or stacked, they should be observed to
operate properly in the configuration in which they are used.
• Class A equipment is intended for use in industrial environments where it may be
potentially difficult to ensure electromagnetic compatibility in other environments
due to workstation conducted disturbances and radiated disturbances.
• Use of accessories outside the regulations may result in increased emissions or
immunity to emissions from equipment or systems.
WARNINGS: USE
• The insight workstation should only be used by doctors or trained caregivers.
Before using the insight workstation, the user should check and ensure that the
product works properly and safely.
• The insight workstation must be charged with the power adapter supplied by
Insighters, otherwise the workstation may be damaged.
• The signal transmission may be delayed due to the local network.
• Insighters may release software upgrades for the workstation, detailed
information please base on real device. (Refer to section 6.3 system software.)
• The signal input and signal output sections can only be connected to the
equipment supplied by Insighters
• Under the premise that the packaging is damaged or not used for a long time,
To Next Page