Insignia HD Radio NS-HD02 - Manual Tuning in Analog;RBDS Mode; Manual Tuning in HD Radio Mode

28
NS-HD02
www.insigniaproducts.com
To manually tune to a frequency in
analog (FM) mode or RBDS mode:
• Press for less than one second. Your radio goes
to the next higher frequency. Each press of the
button changes the frequency by 0.2 MHz.
• Press for less than one second. Your radio goes
to the next lower frequency. Each press of the
button changes the frequency by 0.2 MHz.
• Press and hold or to fast-forward or
fast-reverse through frequencies.
To manually tune to a frequency in HD Radio
mode:
• Press for less than one second. Your radio goes
to the next higher multicast channel for the current
station. When your radio reaches the highest
multicast channel, it goes to the the next higher
frequency.
• Press for less than one second. Your radio goes to
the lower multicast channel for the current station.
When your radio reaches the lowest multicast
channel, it goes to the the next lower frequency.
• Press and hold or to fast-forward or
fast-reverse through multicast channels and
frequencies.
NS-HD02_11-0133_MAN_V3.fm Page 28 Tuesday, March 8, 2011 1:04 PM