SETTING UP AND USING YOUR ANTENNA
1. Connect the end of the coaxial cable to the coaxial jack on the back of your TV or digital converter
box.
Connect to HDTV Connect to TV through digital
converter box
2. If possible, place your antenna near a window and away from sources of interference, then adjust
the UHF and VHF antennas.
3. Turn on your TV and press input or source. Select the input for your antenna (usually labeled TV).
4. Open your TV’s Setup menu, then select the “scan” or “channel scan” option. Your TV
automatically searches for available channels in your area. Refer to your TV’s User Guide for
detailed instructions.
SIGNAL RECEPTION
For the best reception, check the following conditions:
Install the antenna as high as possible to avoid possible obstacles between the antenna and the
transmission tower.
If possible, place the antenna near windows.
Keep the antenna away from sources of interference such as air conditioners, hair dryers, and
microwave ovens.
Run a channel scan every time you move your antenna.
If possible, position your antenna toward the transmission tower. To determine which channels
are available in your area, visit www.antennaweb.org. Type in your zip code to get help with
antenna placement.
To Next Page
Loading...