Insignia NS-R5101 User Manual

16
Insignia NS-R5101 5.1 Surround Sound A/V Receiver
www.insignia-products.com
Connecting a tape player or mini-disc recorder
To connect a tape player or mini-disc
recorder:
• Connect the audio cable(s).
• Connect one end of the audio cables to
the receiver.
• Connect the other end of the cables to the
tape player or mini-disc recorder.
Connecting six channel components
To connect your six channel components:
• Connect the audio cable(s).
• Connect one end of the audio cables to
the receiver.
• Connect the other ends of the cables to
the corresponding analog outputs of a six
channel decoder or DVD player with six
channel Dolby Digital (DTS) output.
Connecting a video game console or camcorder
To connect a video game console or
camcorder:
1 Connect your audio and video cables to the
receiver.
2 Connect the other ends of the cables to the
video game console or camcorder.
Connecting the setup microphone
To connect the setup microphone:
• Connect the microphone to the SETUP MIC
jack when performing auto speaker setup.
For more information, see “Using Auto
Setup” on page 19.
Notes
• Because the microphone for Auto Setup is
designed for use with this receiver, do not use a
microphone other than the one supplied with
this receiver.
• After you have completed the auto setup
procedure, disconnect the microphone.

Insignia NS-R5101 Specifications

General

Brand	Insignia
Model	NS-R5101
Category	Receiver
Language	English