PACKAGE CONTENTS
• 3-Device Universal Remote
• Quick Setup Guide
FEATURES
• Works with a TV and a cable,
satellite, or streaming box, plus
a Blu-ray or DVD player and a
soundbar or other audio-only
device
• Programming by popular brand
names for quick and easy setup
• Extensive code library for less
common brands and devices
• Premium design, materials, and
construction for rugged use
INSTALLING BATTERIES
• Insert two AAA batteries (not
included) into the remote. Make
sure that the + and – symbols
match the + and – symbols in the
battery compartment.
Note: To set up your remote, follow the
setup steps below, in order, and STOP
as soon as your remote works correctly.
PROGRAMMING YOUR
REMOTE
There are three ways to set up your
remote:
• Use “Setup method A: Popular
brands” for pre-set popular brands.
• Use “Setup method B: Direct code
entry” if your device’s direct code is
in the code list starting on page 12.
• Use “Setup method C: Code search”
to perform a code search for your
device.
Note: This remote comes pre-set for
Insignia TVs and DVDs and Apple TV
cable/satellite/streaming set-top boxes.
Setup method A: Popular brands
1 Turn on your target device.
2 Press and hold SETUP until your
remote’s LED blinks twice.
3 Press
TELEVISION or
CABLE / SATELLITE /
STREAMING, or
BLURAY/
DVD to select the mode you want
to set up. The LED stays lit.
To Next Page
Loading...
