24 | support@instantpot.com | 1-800-828-7280
Pressure control features
Float valve
The oat valve is a visual indication of whether there is pressure in the multicooker
(pressurized) or not (depressurized). It appears in two positions:
The oat valve and silicone cap work together to seal in pressurized steam. These parts
must be installed before use. Do not attempt to operate the Instant Pot without the oat
valve properly installed. Do not touch the oat valve during use.
Pressurized
The oat valve has visibly popped
up above the surface of the lid.
Depressurized
The oat valve has descended,
and the top is ush with the lid.
Illustrations in this document are for reference only and may differ from the actual product.
Always refer to the actual product.
DANGER
DO NOT attempt to remove the lid while the oat valve is up and NEVER
attempt to force the lid open. Contents are under extreme pressure. Float
valve must be down before attempting to remove the lid. Failure to follow these
instructions may result in serious personal injury and/or property damage.
To Next Page
Loading...
Need help?
General
