16
User Manual
17
User Manual
Anti-Block Shield
The anti-block shield prevents food particles from coming up through
the steam release pipe, assisting with pressure regulation.
As an integral part of product safety, the anti-block shield must be
installed before use and cleaned frequently.
Remove the Anti-Block Shield
• Grip the lid like a steering wheel and use your thumbs to press
firmly against the side of the anti-block shield (pressing towards
the side of the lid and up) until it pops off the prongs underneath.
Install the Anti-Block Shield
•
Place anti-block shield over prongs and press down until it snaps
into position. Do not attempt to operate the pressure cooker
without the anti-block shield installed.
To Next Page
Loading...
