Preparing the System:
Donning the Integra Duo Headlight
Loosen both knobs (top and rear) by turning
counter-clockwise to a size large enough to
allow the headlight to easily fit onto your head
without disturbing loupes, caps, mask, etc.
Carefully don the headlight. Position the
occipital basket ensuring the pad sits low on
the back of your head.
Adjust the top knob until the brow pad is
positioned comfortably against your forehead.
Confirm that the headlight is securely
adjusted to your head, tight enough for
your preference and loose enough to stay
comfortable for the duration of your case.
If not, tighten or loosen the knobs as needed.
Aer adjusting the top knob, tighten the rear
knob slowly until headlight feels snug.
5
4
3
2
1
14
To Next Page
Loading...