Electromagnetic Compatibility (EMC) User Information
Note: The EMISSIONS characteristics of this equipment make it suitable for use in industrial areas
and hospitals (CISPR 11 class A). If it is used in a residential environment (for which CISPR 11 class
B is normally required), this equipment might not offer adequate protection to radio-frequency
communication services. The user might need to take mitigation measures, such as relocating or
reorienting the equipment.
Table 1:
Guidance & Manufacturer’s Declaration – Emissions All Equipment & Systems
The Integra LED Surgical Headlight System is intended for use in the electromagnetic environment
specified below. The user should ensure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Enforcement -
Guidance
RF Emissions CISPR 11 Group 1 The Integra LED Surgical Headlight System
uses RF energy only for its internal function.
Therefore, RF emissions are very low and are
not likely to cause any interference in nearby
electronic equipment.
RF Emissions CISPR 11 Class A
Radiated and
Conducted
Emissions
The Integra LED Surgical Headlight System
is suitable for use in industrial areas and
hospitals (CISPR 11 class A).
Harmonics IEC 61000-3-2 Class A
Voltage fluctuations/
flicker emissions IEC
61000-3-3
Complies
26
To Next Page
Loading...