Workstation Board Features
Intel® Workstation Board S5520SC Service Guide 25
Intel
®
RAID Activation Key
You can purchase and install the Intel
®
RAID Activation Key AXXRAKSW5 to enable Software RAID 5 support on your
Workstation board or the Intel
®
SAS Entry RAID Module AXX4SASMOD. For the Intel
®
Workstation Board S5520SC, you can
install an Intel
®
RAID Activation Key (AXXRAKSW5) in the SATA RAID 5 Key connector. For the Intel
®
SAS Entry RAID
Module AXX4SASMOD, you can install an Intel
®
RAID Activation Key (AXXRAKSW5) in the SAS RAID 5 key connector of
the SAS module card.
Hard Disk Drives
The Intel
®
Workstation Board S5520SC supports different hard disk driver options.
USB or Serial SATA (SATA) Solid State Drives
Serial SATA (SATA) and Serial Attached SCSI (SAS):
– Supports for SATA Hard Disk Drive: Six on-board SATA ports at 1.5 Gbps and 3 Gbps.
– Supports for SAS or SATA Hard Disk Drives: Four SAS ports via optional Intel
®
SAS Entry RAID Module
AXX4SASMOD at 1.5 Gbps (SATA) and 3 Gbps (SATA and SAS).
✏
NOTE
For additional information and drive installation instructions, see the documentation included with your server chassis.
Intel
®
Remote Management Module 3
The Intel
®
Remote Management Module 3 (RMM3) plugs into a connector on the workstation board and acts as a component
of the workstation board, and provides a way to view and operate the server remotely in real-time. Keyboard, video, and
mouse control (KVM) is redirected to a managing system. This provides remote control. USB media redirection allows you to
use a USB device anywhere on the network as if it was installed on the management server with RMM3 installed. For
example, you can insert a CD-ROM disk in a workstation CD-ROM drive and the managed server will view it as its own, local
CD-ROM drive.
Intel
®
Local Control Panel
The Intel
®
Local Control Panel provides enhanced system control by using an LCD display, which provides additional controls
and indicators beyond the standard control panel.
Internal Video Cable Accessory (FXXSCVDCBL)
This internal video cable accessory is to cable out the Intel
®
Workstation Board S5520SC on-board video to an external VGA
connector. If you do not use the Intel
®
Workstation Board S5520SC on-board video, this cable accessory is not needed.
To Next Page
Loading...
Need help?
General
