Intel Extensible Firmware Interface

To Next Page

To Previous Page

32/64-bit UNDI Specification

Version 1.02 12/12/00 405

G.3.4.5 PXE_STATCODE

typedef PXE_UINT16 PXE_STATCODE;

#define PXE_STATCODE_INITIALIZE 0x0000

//*******************************************************

// Common StatCodes returned by all UNDI commands, UNDI protocol

// functions and BC protocol functions.

//*******************************************************

#define PXE_STATCODE_SUCCESS 0x0000

#define PXE_STATCODE_INVALID_CDB 0x0001

#define PXE_STATCODE_INVALID_CPB 0x0002

#define PXE_STATCODE_BUSY 0x0003

#define PXE_STATCODE_QUEUE_FULL 0x0004

#define PXE_STATCODE_ALREADY_STARTED 0x0005

#define PXE_STATCODE_NOT_STARTED 0x0006

#define PXE_STATCODE_NOT_SHUTDOWN 0x0007

#define PXE_STATCODE_ALREADY_INITIALIZED 0x0008

#define PXE_STATCODE_NOT_INITIALIZED 0x0009

#define PXE_STATCODE_DEVICE_FAILURE 0x000A

#define PXE_STATCODE_NVDATA_FAILURE 0x000B

#define PXE_STATCODE_UNSUPPORTED 0x000C

#define PXE_STATCODE_BUFFER_FULL 0x000D

#define PXE_STATCODE_INVALID_PARAMETER 0x000E

#define PXE_STATCODE_INVALID_UNDI 0x000F

#define PXE_STATCODE_IPV4_NOT_SUPPORTED 0x0010

#define PXE_STATCODE_IPV6_NOT_SUPPORTED 0x0011

#define PXE_STATCODE_NOT_ENOUGH_MEMORY 0x0012

#define PXE_STATCODE_NO_DATA 0x0013

Intel Extensible Firmware Interface - Page 423