Extensible Firmware Interface Specification
452 12/12/00 Version 1.02
Bulk NvData CPB
// When using bulk update, the size of the CPB structure must be
// the same size as the non-volatile NIC storage.
typedef union u_pxe_cpb_nvdata_bulk {
// Array of byte-wide data items.
PXE_UINT8 Byte[n];
// Array of word-wide data items.
PXE_UINT16 Word[n];
// Array of dword-wide data items.
PXE_UINT32 Dword[n];
} PXE_CPB_NVDATA_BULK;
G.4.15.2 Waiting for the Command to Execute
Monitor the upper two bits (14 & 15) in the CDB.StatFlags field. Until these bits change to
report PXE_STATFLAGS_COMMAND_COMPLETE or PXE_STATFLAGS_COMMAND_FAILED,
the command has not been executed by the UNDI.
StatFlags Reason
COMMAND_COMPLETE Command completed successfully. Non-volatile data is updated from
CPB and/or written to DB.
COMMAND_FAILED Command failed. StatCode field contains error code.
COMMAND_QUEUED Command has been queued.
INITIALIZE Command has been not executed or queued.
To Next Page
Loading...