9
Image
Product Code
MM
UPC
EAN
MOQ
Description
P4308XXMFDN
916334
00735858244640
5032037039215
1
A general purpose pedestal chassis targeted at small to medium business
supporting CEB and EEB form factor server boards with 3.5" Fixed HDDs,
single 460W Cold-Redundant Power Supplies and non-Redundant
Cooling.
Includes:
8x 3.5" Fixed Drive Carriers, 1x 460W Common Redundant Power Supply
(Platinum Efficiency), 2x 120mm fixed fans,two 150mm SATA power
cables with one 4-pin ATX power header and 2 vertical SATA power
headers, four 600mm SATA cables , each cable has one vertical SATA
header and one right angle SATA header.
Note: This chassis is compatible with multiple server board SKUs. As
such the specific airduct and cables for that server board needs to be
ordered separately. This chassis does not have any airduct.
AUPMGPUBR (MM#920613) needs to be ordered to support add-in
GPGPU cards.
Note: End of Life (EOL) has been announced for this SKU. See
PCN112161 for details.
P4304XXMHEN
916336
00735858244657
5032037039222
1
A general purpose pedestal chassis targeted at small to medium business
supporting CEB and EEB form factor server boards with 3.5" Hot-Swap
HDDs, 1x 550W Fixed Power Supplies and non-Redundant Cooling.
Includes:
4x 3.5" Hot-Swap Drive Carriers, 550W Fixed Power Supply (Silver
Efficiency), 2x 120mm fixed fans, one 480mm miniSAS cable with one
vertical miniSAS header and 4 vertical SATA headers, one 100mm Hot
Swap Backplane power cable with one 4-pin ATX power header and one
2x2 header.
Note: This chassis is compatible with multiple server board SKUs. As
such the specific airduct and cables for that server board needs to be
ordered separately. This chassis does not have any airduct.
AUPMGPUBR (MM#920613) is required to support add-in GPGPU cards.
AUPMCOPROBR (MM#926364) is required to support add-in Intel
®
Xeon
Phi
™
coprocessor cards.
Note: End of Life (EOL) has been announced for this SKU. See
PCN112161 for details.
P4304XXSFCN
911754
00735858219358
5032037016933
1
Intel
®
Server Chassis P4304XXSFCN (Entry Pedestal Chassis w/ 4 Fixed
Drive Carriers, 365W non-redundant power supply). Include two SATA
power cables. Each cable has one 4-pin ATX power header and two
vertical SATA power headers.
Note: This chassis supports S1200BTL and S1200BTS boards only. No
air duct required for S1200BTL and S1200BTS to be used in this chassis.
This chassis does not support add-in GPGPU cards.
To Next Page
Loading...
Need help?
General
