Intel S5520HC Spares Parts List & Configuration Guide

7
• Intel
®
Workstation Board S5520SC pre-installed in the Intel
®
Sever Chassis SC5650WS
• Support for six tool-free non hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.
• Non-redundant 1000W high efficiency PFC power supply
• Three non-redundant fixed cooling fan with ducting
• Quick Start User’s Guide and Configuration Label
• Cables (one each)
o Front Panel Cable (baseboard header to front panel, pre-routed))
o USB Cable (USB header to chassis front panel, pre-routed)
o Adapter Cable providing two additional SATA power connectors (in cable kit)
o AC power cord is only included in SC5650SCWSNA
• Chassis intrusion switch assembly (pre-routed)
• The workstation system is designed to work with Intel
®
Xeon
®
processor 5500 series with 130W maximum
power, and is compatible with boxed STS100C (Combo) or STS100A (Active) heat sink.
11) Common accessories include:
Hot Swap Drive Bays:
– AXX6DRV3GEXP: Expander-based 6-drive bay that supports SAS/SATA drives. Requires two free
SAS ports from the SAS personality module or SAS RAID card.
– AXX4DRV3GEXP: Expander-based 4-drive bay that supports SAS/SATA drives. Requires two free
SAS ports from the SAS module or SAS RAID card. Only supported in Intel
®
Server Chassis
SC5600BRP, and SC5600LX.
– AXX6DRV3GR: 6-drive bay that supports SAS/SATA drives. Requires six free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS personality module or SAS RAID Card.
Support 6Gb SAS Hard Drives with compatible 6Gb SAS adapters
– AXX4DRV3GR: 4-drive bay that supports SAS/SATA drives. Requires four free SAS or SATA ports.
SAS hard drive support requires SAS connectors from a SAS personality module or SAS RAID Card.
Only supported in Intel
®
Server Chassis SC5600BRP and SC5600LX. Support 6Gb SAS Hard Drives
with compatible 6Gb SAS adapters.
AXX750WPS: Spare 750W power supply module for Intel
®
Server Chassis SC5600LX and SC5600BRP
ARIGRACK: Rack conversion kit (SC5600BASE, SC5600BRP and SC5600LX)
APP3RACKIT: Rack conversion kit (SC5600 chassis family).
AXXRAKSW5: Intel
®
RAID Activation Key AXXRAKSW5 to enable Intel Embedded RAID technology II for SAS
and/or SATA Software RAID 5 on S5520HC, S5500HCV, and S5520SC boards.
APPT600WHPSU: Additional 600W power supply module- required for full redundancy for SC5650BRP only.
APPTHSDBKIT: Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis
family. This kit should be used with AXX6DRV3GR
APP3HSDBKIT: Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis
family. This kit should be used with AXX6DRV3GEXP.
AXX25DRVADPTR: 2.5” hard drive carrier kit for installing 2.5” SATA or SAS hard drive or Solid State Drive into
3.5” hot swap drive bay

Intel S5520HC Specifications

General

Brand	Intel
Model	S5520HC
Category	Software
Language	English