Manual
CTA Tracklight
Lights on & pair
Adjust Light
Nightmode
Personal
Adjust color
temperature
Preset color temperature
Choose group
>ŝŐŚƚƐŽīΘƵŶƉĂŝƌ
Grouping
On the driver, select which group you want to assign the luminaires by use of the dip switches.
Pairing
Unplug current before paring.
Press and hold the pair button, the red light will flash quickly. While holding down the pair button,
connect the luminaire to the powergrid, then release the pair button. The luminaires are now paired with the
remote control. To unpair do the same with the unpair button.
Choose a group
The settings for choosing a group are matched with the settings on the driver. 1 Stands for A, 2 for B, 3 for C etc.
If you want to adjust a setting for the whole group, select the group on the remote control and adjust the desired
light quantity or color temperature.
Remote
To Next Page
Loading...