Item No. 8105089 – 12/2013 Page 5 of 6
Importing and Exporting Test Protocols
The REM440 also allows you to import and export test protocols to other REM440 users.
Exporting a Test Protocol:
1. Go to the REM440 Setup (Menu | Setup | REM440 setup).
2. Click on Export.
3. Select if the file is to be saved as “read only”. In this case the protocol file is locked and the clinician
receiving it will not be able to make changes to it.
4. Browse for the location on the PC or USB where the test protocol is to be saved
Click Save. Other REM440 users will now be able to upload the test protocol using the Import function.
To Next Page
Loading...
