Interlogix ZEROWIRE ZW-6404 - Front of ZeroWire; Key Indicators and Buttons

ZeroWire Installation Manual 11
Front of ZeroWire
Key
Colour
Description
ALARM
Red
System is in alarm. Enter your PIN
code then ENTER to turn off the
alarm. Press STATUS key for more
info.
STAY
Not lit
System is disarmed if Away is also
not lit. Press the STAY key to arm
in Stay mode.
Yellow
System is armed in the “STAY”
mode.
STATUS
Green
System is normal.
Yellow
Non-urgent system conditions
present. Press the STATUS key to
hear system conditions.
Red
(steady)
Urgent system conditions present.
Touch the STATUS key to hear system
messages. If you are unable to fix the issue,
contact your service provider for help.
AWAY
Not lit
System is disarmed if Stay is also not
lit. Press the AWAY key to arm in
Away mode.
Red
System is armed in the “AWAY”
mode.
READY
Not lit
System cannot be armed, press
STATUS key for more info.
Green
(steady)
All zones are ready and the system can
be armed in Away or Stay mode.
Key
Colour
Description
READY
Green
(flashing)
Zones are currently unsealed but
system is force
-
armable. If these zones
are not sealed by the end of the exit
time the system will go into alarm
(unless set up for automatic bypass).
BYPASS
Press the BYPASS key if you wish to isolate
(ignore) a zone. Bypassed zones will not be
active when you arm the system in Stay or
Away modes.
CHIME
Press the CHIME key to select which zones
will make a doorbell sound on the
ZeroWire
when they are tripped.
HISTORY
Press the HISTORY key to listen for alarm and
event history.
FIRE
MEDICAL
POLICE
Feature must be enabled by your security
provider. Check what response will be
provided. Hold down the key to send a
message to a
central monitoring centre. Enter
your PIN code then ENTER to turn off a SOS
alarm.
Microphone
Stay Arm Key
Status Key
Away Arm Key
Ready Light
Bypass Key
Chime Key
History Key
Siren
Enter Key
Numeric
Keys
Menu
Key
Speaker
Alarm Light
SOS
Emergency
Keys