ZeroWire Installation Manual 17
A zone in a normal state is “sealed”. The security system monitors each zone for
changes in state from sealed to unsealed and can respond with certain actions such
as sounding the siren.
For example, a reed switch on a front door may change from a sealed state to an
unsealed state when the door opens.
The installation / maintenance company servicing your security system.
To turn your security system on when you are staying in the premises, this will
automatically bypass pre-programmed zones and arm others. Often used to arm
only the perimeter while allowing movement inside the premises.
A physical switch on a device that detects unauthorised access to the unit. For
example opening the case of a zone or taking a keypad off the wall can trigger a
tamper alarm. This can provide early warning of someone attempting to undermine
the security of your system. Some devices use an optical zone to detect removal
from a surface.
Each token is a pre-recorded word or phrase that can be used to name zones,
areas, outputs, and rooms.
Each token is identified by a token number and a full list of tokens is in the "Voice
Library" on page 106.
Mobile app for smartphones to access your ZeroWire. View status, control zones
and outputs, control Z-Wave devices, view cameras, program users and other
ZeroWire features. Available to download for Apple
TM
iPhone
TM
and Google
TM
Android
TM
from the respective app store. This app replaces the UltraConnect app.
The UltraSync + app connects to the UltraSync cloud servers which then connects
you securely to your ZeroWire system and cameras.
A secure cloud service with full redundancy to route encrypted alarm messages
from your ZeroWire to a Central Monitoring Station. It also provides secure
connections between the UltraSync + app, ZeroWire, and cameras. No
programming, email addresses, user names, or PIN codes are stored on these
servers for greater security.
A zone in an abnormal state is “unsealed”. The security system monitors each zone
for changes in state from sealed to unsealed and can respond with certain actions
such as sounding the siren.
For example, when a PIR zone detects movement it will change from a sealed state
to an unsealed state.
An authorised person who can interact with the ZeroWire security system and
perform various tasks according to the permissions assigned to them.
Each ZeroWire user has a set of profile levels. These control what the user has
access to, a list of functions, and when the user is allowed to perform these
functions.
A user is typically a person who is assigned a PIN code and arms/disarms the
system with this code or keyfob device.
Users can also be automatic functions of the system. For example, ZeroWire can
automatically arm specific area
s a user has access to at a specified time. No human
interaction is required; all the permissions of the programmed user will still be
applied and enforced.
A PIN code that is used by a user to arm or disarm the se
curity system. Also can be
used as a function code for certain features.
The main controller for the security system. It stores all programming, provides
network and other connectivity options for reporting, provides physical terminals for
connecting power, backup battery, zones, and outputs.
To Next Page
Loading...
