Need help?Do you have a question about the Intermatic TN111 and is the answer not in the manual?
General| Amperage | 15 A |
|---|---|
| Horsepower | 1/2 HP |
| Minimum ON/OFF Time | 30 minutes |
| Maximum ON/OFF Time | 24 hours |
| Enclosure | Indoor |
| Mounting | Wall |
| Outlets | 1 |
| Weight | 0.5 lbs |
| Type | Mechanical Time Switch |
| Voltage | 120V |
Insert ON and OFF trippers into dial slots at desired ON and OFF times. Push them firmly against the dial surface.
Do not insert trippers next to each other; ensure they are pushed down firmly against the dial surface.
Turn the dial clockwise with the arrow head pointed to the correct time.
The dark area on the dial indicates PM, and the white area indicates AM.
Use the ON-OFF wheel at the top of the timer, turning it counter-clockwise in the direction of the arrows.
Identifies the automatic override control on the timer.
Identifies the 2-prong outlet on the timer.
Identifies the main time setting dial.
Identifies the red 'OFF' tripper for programming.
Identifies the green 'ON' tripper for programming.
Identifies the heavy-duty grounded outlet on the timer.
