Intermec 710 User Manual

The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
The Intermec CK60 Handheld Computer Bumpers (p/n: 203-710-001) help protect
your CK60 from the normal bumps and occassional drops that happen during its
use.
1 To remove the damaged bumpers use a T-10 driver and remove the top and
bottom screws from each of the four corner Bumpers.
2 Attach the new bumpers using the replacement black #6-32 x 3/4 cap screws on
the back side and #6-32 x 3/16 silver cap head screws on the top side. Use the
T-10 driver to tighten the screws. The recommended torque is 5 in-lbs. Ensure
that the honeycomb part of the bumper is on the back side of your CK60.
.
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*962-000-055A*
P/N 962-000-055A
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*962-000-055A*
P/N 962-000-055A
Instructions
Corporate Headquarters
6001 36th Avenue West
Everett, Washington 98203 U.S.A.
tel 425.348.2600
www.intermec.com
© 2005 Intermec Technologies
Corporation. All rights reserved.
CK60 Handheld Computer Bumper Replacement Instructions
*
962-000-055A*
P/N 962-000-055A
CK60 Handheld Computer Bumpers
CK60 Handheld Computer Bumpers CK60 Handheld Computer Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers
Instructions
Bumper
honeycomb on
bottom side
T-10 Driver
Screws (8) to
attach
Bumpers

Intermec 710 Specifications

General

Brand	Intermec
Model	710
Category	Accessories
Language	English

Summary

CK60 Handheld Computer Bumper Replacement Instructions

Purpose and Protection

Explains how CK60 bumpers protect the device from drops and impacts during use.

Removal and Installation Steps

Detailed steps for removing damaged bumpers and attaching new ones using specific screws and torque.

Technical Details for Installation

Specifies screw types, sizes, torque settings, and correct orientation for bumper attachment.