Intermec CN3E - User Manual

CN3NI
Dust Clip Instructions
Use these instructions to attach the dust clip to both the CN3 and CN3e
mobile computers. The dust clip seals out dust and airborne particles from
the CN3NI in Division 2 Class II and III environments.
CN3NI Computers: This illustration shows the CN3 Series Mobile Computers with
the dust clip properly installed.
Make sure the dust clip completely covers the docking
connector on the CN3 or CN3e and that it snaps into place.

Intermec CN3E Specifications

General

RAM	128 MB
Storage	256 MB Flash
Display	3.5 inches
Operating System	Windows Mobile 6.1
Camera	1.3 MP
Wireless Connectivity	Bluetooth
Barcode Scanning	Integrated 1D/2D imager
Expansion Slots	SDIO
Operating Temperature	-10°C to 50°C
Durability	IP54 rated