This document provides assembly instructions for a STORAGE CHEST 37 INCH RTA, identified by Item No.: TC-937. The manual was revised on September 24, 2014, and printed in Vietnam.
Function Description:
The device is a Ready-To-Assemble (RTA) storage chest, designed for general storage purposes. Its primary function is to provide an enclosed space for organizing and storing various items, helping to declutter living spaces. The chest features a hinged top panel, allowing for easy access to the storage compartment. The design appears to be a simple, rectangular chest with a flat top, suitable for placement in various rooms such as bedrooms, living rooms, or entryways. The "37 inch" in the description likely refers to its width, indicating a moderately sized storage solution.
Important Technical Specifications (Derived from Part List):
The storage chest is constructed from several wooden panels and assembled using various hardware components.
- Wooden Components:
- Top panel (A): 1 unit
- Back panel (B): 1 unit
- Support bottom panel (C): 2 units
- Front panel (D): 1 unit
- Side panel (E): 2 units (Left & Right)
- Bottom panel (F): 1 unit
- Hardware Components:
- BOLT (M6x30mm) (1): 12 units. These are likely used for securing the main structural panels together, providing strong connections. The M6 designation indicates a 6mm diameter bolt, and 30mm is its length.
- Spring washer (Ø6.5x11mm) (2): 12 units. These washers are designed to prevent loosening of fasteners due to vibration or thermal expansion/contraction, ensuring the structural integrity of the chest. The Ø6.5mm refers to the inner diameter, compatible with M6 bolts.
- Flat washer (Ø6.5x13mm) (3): 12 units. Flat washers distribute the load of the fastener over a wider area, protecting the wood surface from damage and providing a more secure connection.
- Hinge (4): 2 units. These are crucial for the functionality of the top panel, allowing it to open and close smoothly. The diagram shows a standard butt hinge design.
- Short screw (M4x15mm) (5): 22 units. These smaller screws are likely used for attaching the hinges and potentially other less load-bearing components. M4 indicates a 4mm diameter, and 15mm is its length.
- Long screw (M4x30mm) (6): 4 units. These longer screws are used for attaching the support bottom panels, requiring a deeper penetration for stability.
- Allen key (7): 1 unit. This tool is provided for tightening the M6 bolts, indicating that these bolts have an internal hexagonal drive.
The combination of bolts, spring washers, and flat washers for the main structural connections suggests a robust assembly method, designed for durability. The use of different screw lengths for various attachments indicates careful engineering for specific panel thicknesses and load requirements.
Usage Features:
- Easy Assembly (RTA): The product is designed as "Ready-To-Assemble," meaning it comes in a flat-pack format with all necessary parts and instructions for the end-user to put together. This typically implies a modular design with pre-drilled holes and standardized hardware.
- Storage Capacity: As a "storage chest," its primary utility is to offer a significant internal volume for storing various household items, such as blankets, toys, books, or seasonal clothing. The "37 inch" width suggests a good balance between storage capacity and footprint.
- Hinged Top: The presence of hinges (4) for the top panel (A) indicates a lift-top design, providing convenient access to the contents of the chest. This design is common for storage chests, allowing for quick retrieval or stowing of items.
- Versatile Placement: Given its likely aesthetic and functional design, the chest can be used in various rooms. In a living room, it could serve as a blanket box or toy chest. In a bedroom, it could store extra bedding or clothing. In an entryway, it might hold shoes or outdoor accessories.
Maintenance Features:
The manual includes several important notes regarding assembly and general care, which can be interpreted as maintenance features:
- Pre-Assembly Check: Users are instructed to check all parts and hardware for completeness and defects before assembly. This proactive step helps prevent issues during assembly and ensures the final product's quality. If parts are missing or defective, users are advised to contact the store or a toll-free number.
- Surface Protection: An "IMPORTANT NOTE" advises placing all wooden parts on a clean and smooth surface (like a rug or carpet) during assembly to prevent scratches. This practice extends the aesthetic life of the furniture.
- Proper Fastening: The instruction "DO NOT tighten all screws and bolts until completely assembled" is crucial. This allows for minor adjustments during assembly, ensuring all parts align correctly before final tightening, which contributes to the structural integrity and longevity of the chest.
- Hardware Safety: "Keep all hardware parts out of reach of children" is a safety instruction that also implicitly contributes to maintenance by preventing loss or damage of small components.
- Chemical Reaction Warning: A "WARNING" states that "Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish on your product. Protect the surface of the product with a cloth if you are using any product with rubber feet or base." This is a critical maintenance instruction for preserving the finish of the wooden chest. It advises users to use a protective barrier (cloth) between the chest's surface and any items with rubber or soft plastic components, such as electronic devices, decorative items, or even the feet of other furniture placed on top or near the chest. This prevents discoloration, stickiness, or degradation of the finish over time, ensuring the chest retains its appearance.
- Cleaning: While not explicitly detailed, the warning about chemical reactions implies that general cleaning should be done with non-abrasive, finish-safe cleaners and soft cloths to avoid damaging the surface. Regular dusting and wiping would be standard maintenance for such a wooden furniture piece.
In summary, the TC-937 Storage Chest is a functional, user-assembled furniture piece designed for practical storage with a focus on durability through its hardware and assembly method. Its maintenance requirements primarily involve careful assembly, protection of its finish from chemical reactions, and general care to preserve its appearance and structural integrity over time.
Need help?
General
To Next Page
