Intex PureSpa Greywood Deluxe - Page 35

309
IO
(309IO) MULTI-COLORED BATTERY OPERATED LED LIGHT FOR INTEX
®
BUBBLE SPA ENGLISH 7.25” X 4.875” 04/10/2022
SAVE THESE INSTRUCTIONS
Page 2
Parts reference:
REF. NO. DESCRIPTION QTY. SPARE PART NO.
1
BATTERY HOUSING COVER WITH O-RINGS 1 12409
2
BATTERY HOLDER 1 12410
3 SPA LED LIGHT 1 12411
To install or replace batteries:
1. Dry product completely. Unscrew the battery housing
cover
(1)
from the Spa LED light (see Fig 1). Be careful
not to lose the two o-rings on the battery housing cover.
2. Insert 3 AAA size batteries following the orientation shown
on the battery holder
(2)
(see Fig 2).
Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which
may result in updates to the instruction manual without notice.
Fig 2
1
2
3
Fig 4
Fig 3
3. Reinstall the battery holder
(2)
into the LED light body according to the orientation (see Fig 3).
4. Securely tighten the battery housing cover
(1)
by hand only (see Fig 4).
Fig 1
O-rings