Need help?Do you have a question about the Intrise AIR ZERO AZ Series and is the answer not in the manual?
General| Brand | Intrise |
|---|---|
| Model | AIR ZERO AZ Series |
| Category | Kitchen Appliances |
| Language | English |
Details the types of electricity and plugs compatible with the machine.
Explains the meaning of warning labels for user safety.
Shows the physical locations of caution labels on the machine.
Guides users on checking the machine and verifying included spare parts and tools.
Critical safety instructions to prevent accidents and ensure proper use.
Methods and tips for optimizing the sealing process for best results.
Defines the machine as a nozzle-type vacuum and gas flushing packaging unit.
Explains the different operational modes and their sequences.
Describes the sealing process and general film compatibility.
Specifies the maximum thickness of packing film the machine can seal.
Identifies and labels the main components of the AZ-type machine.
Identifies and labels the main components of the AZV-type machine.
Comprehensive instructions for machine installation, including power, air, and gas connections.
Essential checks and preparations before starting machine operation.
How to select vacuum/time control and operating modes via buttons.
Usage of TIME, UP, DOWN, and STOP buttons for setting parameters and controlling the process.
A detailed guide covering the entire operational sequence of the machine.
Explains special functions like stopping vacuum, nozzle movement control, and counter reset.
Guide to setting proper time and vacuum degree for each operational mode.
Visual and textual explanation of the step-by-step process in Vacuum Mode.
Details the sequence of operations for Programmable Modes 1 through 8.
Explains the operational steps specific to the Sealing Mode.
Instructions for safely concluding the machine's operation.
Instructions on how to properly clean the machine's nozzle.
Steps for cleaning the internal vacuum and gas lines.
Guide to disassembling, cleaning, and reassembling the vacuum filter.
Instructions for replacing heat wire, Teflon sheets, tape, sealing rubber, and sponge.
Dimensional drawing showing the physical layout of the AZ-type machine.
Dimensional drawing showing the physical layout of the AZV-type machine.
Diagram illustrating the internal components of the AZ-type machine.
Diagram illustrating the internal components of the AZV-type machine.
Electrical circuit diagram for the AZ-type machine.
Electrical circuit diagram for the AZV-type machine.
Resolving issues related to the machine not turning on or starting.
Troubleshooting non-smooth vacuuming and gas insertion failures.
Addressing sealing failures, poor seal quality, and heat wire problems.
Steps for NFB tripping, S Mode sealing issues, and other operational faults.
Guides for setting sensors 1, 2, 3, and 4 for proper machine operation.
Details the product's limited warranty coverage, exclusions, limitations, and service procedures.
To Next Page
