data to a computer.
● G-sensor function
When a car decelerates quickly in an accident, the device will auto-save
the video of the accident as a non-delete file. The G-sensor can be
adjusted in the menu from 2G-4G-8G sensitivity.
● Car parking mode
When parking your car, Scroll to Parking mode and select, “ON”. If the
vehicle detects a vibration from an external force, the camera will turn
on and automatically record for 20-30 seconds and lock the recording.
When a new vibration is detected, the camera will begin a new recording
and lock it so the file will not be overwritten.
● Automatic ON / OFF
After the device is plugged in to the accessory power outlet, turning on
the car will start recording automatically. Turning off the car will save the
recorded video and automatically shut down the device.
● Unclear video
Check to see if there is any dirt on the lens and use lens paper to clean
the WiFi DashCam Pro lens.
● Black image when recording sky or water scene
Scenes with big contrast will influence the automatic exposure function
of camera; you can adjust the “EV” setting accessible via the mode
selection button.
● Color is not good on cloudy days
Set the “white balance” setting via the mode selection button to
automatic.
● Cross stripe interference in image
Reset the “light frequency” via the mode selection button to 50Hz or
60Hz until the cross stripe pattern disappears.
● Crash
Restart the WiFi DashCam Pro by quickly pressing the “RESET” button
after a crash.
● Reset
Push the reset pin in the reset pinhole to restore the DashCam to factory
settings.
To Next Page
Loading...