Invicta 0513BBB - Chronograph Operation: Cumulative Times; Starting Cumulative Time Measurement; Stopping Cumulative Time Measurement; Restarting Cumulative Time Measurement

CHRONOGRAPHS - Measuring Cumulative Times
1. To start, press the top pusher. The center sweep hand will begin measuring seconds.
2. To stop, press the top pusher again.
3. To start again, press the top pusher again.
4. To stop again, press the top pusher again.
5. Repeat this process as many times as needed.
6. After reading the cumulative times, reset the chronograph hands to zero by pressing
the bottom pusher.
CHRONOGRAPHS - Measuring Intermediate Time
1. To start, press the top pusher. The center sweep hand will begin measuring seconds.
2. To stop, press the bottom pusher. This will indicate intermediate time.
3. To start again, press the bottom pusher. The hands will turn at a much faster speed
until they measure the time elapsed since the chronograph was first started. They will
then continue to move at a normal speed.
4. A further intermediate time can be measured by repeating this procedure.
5. To stop the chronograph, push the top pusher.
6. To reset the chronograph hands to zero, press the bottom pusher.
2524