REGULATEUR
This is an Automatic timepiece that may be equipped with a screw down crown. Please
refer to Page 1 for important details and warranty information.
1. To set the time, gently pull out the crown to the first click stop position (1) and rotate
counterclockwise to the time of day. The hour hand is at the 12 o’clock position. The
minute hand is at center. The small second counter is at the 6 o’clock position.
2. After setting the time, push the crown back to its normal operating position (0).
The watch will begin running again. Again, if it is a screw down crown, make sure it
is correctly locked back in place.
REGULATEUR
4140
To Next Page
Loading...
