Need help?Do you have a question about the InVid PN1A Series and is the answer not in the manual?
General| Video Input | 4/8/16 Channels |
|---|---|
| Video Output | HDMI, VGA |
| Audio Output | 1 channel |
| Recording Frame Rate | Up to 30fps per channel |
| Mobile App Support | iOS, Android |
| Operating System | Embedded Linux |
| Compression | H.264 |
| Power Supply | DC 12V |
| Hard Drive Support | Up to 6TB SATA HDD |
| Network Interface | 1 RJ-45 10/100Mbps Ethernet |
| Operating Temperature | -10°C to 55°C |
| Audio Input | 4 channels |
| Recording Resolution | 1080p, 720p, D1 |
Provides an overview of the NVR series, highlighting its advanced SOC technology, human interface, and smart management capabilities.
Details the NVR's capabilities, including basic functions, live preview, disk management, record configuration, and record playback features.
Describes the components and indicators on the NVR's front panel, covering Type I and Type II interfaces.
Explains the various ports and interfaces located on the rear panel of the NVR for connectivity and power.
Details the video output, audio input/output, and alarm connections required for the NVR setup.
Covers the procedures for powering the NVR on and off, including steps for remote controller and mouse.
Explains how to use the remote controller, including battery installation and troubleshooting common issues.
Describes how to operate the NVR using a mouse in live display, playback, and text-input interfaces.
Details the function of various buttons used for text input and system navigation.
Explains common button functions for navigating menus, changing display modes, and managing recordings.
Guides users through the initial NVR setup process, including system login, date/time, and network configuration.
Introduces the NVR's main graphical user interface, detailing its various areas and their functions.
Provides detailed explanations of the buttons and areas within the NVR's main interface for operation and navigation.
Describes the setup panel, which organizes system configurations into seven modules for easy access and operation.
Outlines the main functional modules of the NVR, including Camera, Record, Alarm, Disk, Network, Account, and System.
Explains how to add and manage IP cameras connected to the NVR, including quick and manual addition methods.
Details the process of adding IP cameras, covering network setup, quick addition, and manual configuration steps.
Describes how to modify camera settings, passwords, and upgrade firmware for connected IP cameras.
Guides users on organizing cameras into groups for easier management and display sequencing.
Explains how to create camera groups, set dwell times, and add cameras to these groups for organized viewing.
Covers searching for and adding IP cameras from other NVRs/DVRs to unoccupied channels of the local NVR.
Introduces the live preview interface, explaining camera window exchange and record symbol meanings.
Details different screen modes and camera display sequences for customized live viewing.
Explains how to set and save display modes, including adding and editing custom display configurations.
Describes how to set up quick sequence views for cameras when a specific scheme has not been created.
Guides on viewing cameras in sequence based on pre-created camera groups for organized monitoring.
Explains how to create, configure, and start sequence views using schemes for camera display management.
Details how to configure Point of Sale (POS) integration, including setting positions and triggering cameras for transaction data.
Covers settings for customizing the image display of cameras, including OSD, image properties, and masking.
Explains how to configure On-Screen Display (OSD) settings, such as camera names and time/date formats.
Details how to adjust camera image parameters like brightness, contrast, saturation, and hue.
Describes how to set privacy masks on specific areas of the camera image to protect sensitive information.
Covers configuration for fisheye cameras, including view modes and installation settings.
Provides detailed instructions on adjusting image parameters like sharpness, wide dynamic range, and noise reduction.
Introduces the PTZ control interface, explaining its buttons for dome rotation, zoom, focus, and iris adjustment.
Guides users on setting and saving PTZ presets, including naming, positioning, and managing up to 255 presets.
Explains how to configure PTZ cruise paths, adding up to 8 cruises with specific presets and timings.
Covers setting up recording parameters, including mode configuration, advanced settings, and encode parameters.
Details the different recording modes available (auto and manual) and how to configure them based on events or schedules.
Explains advanced recording settings like cycle record, pre-alarm, post-alarm, and expiration times for recorded video.
Details how to set encode parameters like resolution, FPS, bitrate, and quality for main and sub streams of each camera.
Guides on creating and managing recording schedules, including daily and weekly configurations for different record types.
Explains how to add new recording schedules, set day schedules, week schedules, and copy settings across days.
Covers configuring sensor, motion, timed, and intelligence recording schedules for cameras.
Outlines the different recording modes available: manual, timing, motion-based, sensor-based, and intelligence recording.
Describes how to manually start and stop recording for cameras via the live preview interface or tool bar.
Explains that timing recording operates based on the set schedules for each camera.
Details how to set up motion-based recording, including schedules, sensitivity, and motion areas.
Covers setting up sensor-based recording by configuring schedules and enabling sensor alarms.
Explains how to set up intelligence recording based on schedules and detection types like object detection.
Introduces disk management features, including disk information, formatting, and RAID configurations.
Details how to view disk status, format HDDs, and manage physical disks, arrays, and disk modes.
Covers configuring storage modes, including disk grouping and assigning cameras to specific disks for recording.
Explains how to view HDD information and monitor the Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) status.
Describes how to quickly play back recorded video directly from the live preview interface or by setting a default time.
Introduces the playback interface, detailing the tool bar buttons for controlling playback and navigating recorded footage.
Explains how to use smart playback features, including drawing rectangles or lines to search for specific events.
Covers methods for searching, playing back, and backing up recorded data using various criteria.
Details how to search and play back records using time-sliced images, with options for thumbnail or list views.
Guides on using smart search features, including behavior detection analysis for motion, tripwire, and intrusion events.
Explains how to search, play back, and back up records by specifying dates, times, and event types.
Covers searching and backing up records based on specific event types, such as motion or sensor triggers.
Describes how to search and play back records by adding custom tags to mark specific moments in the footage.
Explains how to manage snapped images, including viewing, exporting, and deleting them.
Details how to check the status of ongoing or completed backup tasks and manage backup operations.
Covers the configuration of sensor alarms, including selecting alarm types and setting up trigger actions like recording or snapshots.
Details how to enable and configure motion detection alarms, including sensitivity, duration, and motion area setup.
Guides on setting up motion detection parameters for cameras, including sensitivity, duration, and defining motion areas.
Explains how to configure alarm handling for motion detection, such as triggering recording, snapshots, or notifications.
Introduces advanced alarm types such as object detection, exception, tripwire, and intrusion detection.
Details configuration for object detection alarms, including setting detection types (abandoned/missing objects) and alarm areas.
Covers exception detection types like scene change, video blur, and video color cast, and their configuration.
Explains how to set up tripwire alarms for line crossing detection, including defining directions and alarm lines.
Details the configuration of intrusion detection alarms, including setting alarm areas and defining intrusion detection parameters.
Covers specific exception alarms like IPC offline status and general exception handling settings.
Guides on configuring alarm handling for IPC offline events, including snapshots, push notifications, and email alerts.
Details general exception handling settings for alarms, similar to sensor alarm configurations.
Explains how to configure various alarm event notification methods, including alarm-out, email, display, buzzer, and push messages.
Covers setting up alarm-out triggers, delay times, and schedules for external alarm devices.
Guides on configuring email notifications for alarms, including recipient settings and SMTP server details.
Details how to configure pop-up video and message box durations for alarm event notifications.
Explains how to configure buzzer settings for alarm events, including delay time and testing.
Covers enabling push message notifications for alarms to mobile clients.
Describes how to manually trigger or clear alarms from the live preview interface.
Explains how to view the current status of various alarms and access detailed alarm information.
Covers managing user accounts, including adding, editing, and deleting users, and assigning permissions.
Guides on adding new user accounts with specific usernames, passwords, and permission group assignments.
Details how to modify existing user accounts, edit security questions, and manage passwords and graphical locks.
Explains the procedures for logging into and out of the NVR system using different interfaces.
Covers managing user permission groups, including adding new groups and assigning various system permissions.
Guides on creating new permission groups, defining group names, and assigning local and remote permissions.
Explains how to edit existing permission groups, save changes, and delete groups as needed.
Details how to configure IP/MAC address filtering to control remote access to the NVR.
Covers settings for enabling or disabling camera preview display when the system is logged out.
Explains how to view information about currently logged-in users and their occupied channels.
Covers NVR network settings, including TCP/IP configuration, port settings, and various network protocols.
Details how to configure IP addresses, subnet masks, gateways, and DNS settings for the NVR's network ports.
Explains how to set up various ports like HTTP, HTTPS, Server, RTSP, and POS for NVR network access.
Guides on configuring PPPoE settings for internet access, requiring username and password from the ISP.
Details how to configure Dynamic DNS (DDNS) services to access the NVR using a domain name.
Covers setting up email notifications for alarms, including recipient settings and SMTP server details.
Explains how to enable Universal Plug and Play (UPnP) for automatic network configuration and remote access.
Details Network Address Translation (NAT) configuration for remote access via WAN, including server address setup.
Covers configuration for File Transfer Protocol (FTP) settings, including server name, port, and user credentials.
Describes how to configure platform access, typically for connecting to management software like Paramont CMS.
Explains how to configure SNMP settings for network monitoring and device information retrieval.
Details how to view the current network status and connectivity of the NVR.
Covers essential system settings, including device name, language, video format, and wizard options.
Guides on setting common configurations like device name, language, video format, and auto-login/dwell settings.
Explains how to set the NVR's system time, date format, time format, and time zone, including DST.
Details how to reset the NVR to its factory default settings, with an option to retain network configuration.
Covers procedures for upgrading the NVR's firmware via USB storage or cloud services.
Explains how to back up and restore the NVR's configuration files to other storage devices.
Details how to schedule automatic restarts for the NVR to ensure regular maintenance and optimal performance.
Guides on viewing system logs, including filtering by type, date, and exporting log files.
Explains how to access and view various system information, such as basic settings, camera status, and disk information.
Details how to configure face detection, including enabling detection, setting duration, alarm areas, and saving face information.
Covers creating and managing target databases for face comparison, including adding faces to allow lists or block lists.
Introduces the face comparison feature, explaining how to perform single and multi-channel comparisons and adjust similarity settings.
Explains how to configure alarm linkages for face matching, including setting similarity thresholds and enabling various notification methods.
Details how to search for and play back recorded footage based on detected faces, using target databases or snapshot galleries.
Covers using smart playback features specifically for face search, including enabling face playback and selecting targets.
Guides on setting up and using the mobile client application for remote surveillance via smartphones.
Explains how to access the NVR remotely via a web browser on the local area network (LAN).
Details how to access the NVR remotely over the Wide Area Network (WAN) using NAT and domain name services.
Introduces the web remote control interface, covering operations like remote preview, playback, backup, and configuration.
Guides on performing remote live preview of cameras using the web interface, including starting preview and panel introductions.
Explains how to perform remote playback of recorded footage using the web interface, including search and control functions.
Details how to back up recorded data remotely via the web interface by event or by time.
Covers remotely configuring NVR settings such as camera, record, alarm, disk, network, and system parameters.
To Next Page