EasyManua.ls Logo

Invivo Essential 865353 User Manual

Invivo Essential 865353
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
*989803173791*
989803173791
Essential MRI Patient Monitor
(Model 865353)
Instructions for Use
989803173791 Rev 0.6
English

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Invivo Essential 865353 and is the answer not in the manual?

Invivo Essential 865353 Specifications

General IconGeneral
Display TypeLCD
Refresh Rate60 Hz
Brightness250 cd/m²
Input PortsVGA
Viewing Angle160° (V)
Dimensions180 mm

Summary

Chapter 1: Important Information

Warnings

Provides critical safety warnings for operating the device.

Safety

Covers critical safety information, including EMC and battery disposal.

Electromagnetic Compatibility (EMC)

Details the system's electromagnetic compatibility requirements and guidelines.

EMC Emissions

Specifies the electromagnetic emissions compliance of the monitor.

EMC Immunity

Outlines the monitor's immunity to electromagnetic interference.

Recommended Separation Distances

Provides guidelines for safe distances from RF sources.

Chapter 2: Getting Started

Battery Operation

Covers how to operate the monitor using batteries and safety precautions.

Using Batteries Safely

Provides essential safety guidelines for handling and using batteries.

Charging Batteries

Guides on how to charge the main and module batteries.

Assigning the Module Network

Explains how to set up wireless network communication for the module.

Changing the Module Network Setting

Details the procedure for changing the module's network configuration.

Initial System Power-Up

Guides through the steps for powering on the system for the first time.

Chapter 3: Preparation for Use

Using the Monitor

General guidelines and warnings for operating the monitor.

Alarm Limits Menu

Allows configuration of SpO2 and HR alarm limits for patient safety.

Chapter 4: Monitoring SpO2

SpO2 Sensor and Wireless SpO2 Module

Describes the SpO2 sensor and wireless module for MR environment use.

Patient Preparation

Instructions for preparing a patient for MRI SpO2 monitoring.

Applying and Positioning the SpO2 Sensor

Details how to correctly apply and position the SpO2 sensor on the patient.

Measuring SpO2

Instructions on how to obtain functional SpO2 values.

Assessing Suspicious SpO2 Readings

Guidance on evaluating questionable SpO2 readings and signal quality.

Managing Alarms

Covers how to access and control alarms for patient safety.

Alarm Types, Priorities and Indications

Classifies alarms by priority and describes their visual/audible indications.

Chapter 6: Maintenance and Repair

Appendix D: Guidelines and References

Guidelines for the Prevention of Excessive Heating And Burns Associated with Magnetic Resonance Procedures

Crucial safety guidelines for preventing heating and burns during MR procedures.