INVT Goodrive 35 Series - Page 100

Goodrive35 inverters Function codes
99
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
delay time
P06.13
RO2
switch-off
delay time
0.000s
○
P06.14
AO1
output
0:Running frequency
1:Set frequency
2:Ramp reference frequency
3:Running rotation speed
4:Output current (relative to 2 times of the rated
current of the inverter)
5:Output current(relative to 2 times of the rated
current of the motor)
6:Output voltage
7:Output power
8:Set torque value
9:Output torque
10:Analog AI1 input value
11:Analog AI2 input value
12:Analog AI3 input value
13:High speed pulse HDI input value
14:MODBUS communication set value 1
15:MODBUS communication set value 2
16:PROFIBUS/CANopen communication set value 1
17:PROFIBUS/CANopen communication set value 2
18: Ethernet communication set value 1
19: Ethernet communication set value 2
20~21: Reserved
22:Torque current(relative to 2 times of the rated
current of the motor)
23:Pre-magnetizing current(100% corresponds to
10V)
24: Setting frequency
0
○
P06.15
AO2
output
0
○
P06.16
HDO
high-speed
pulse
output
0
○
www.barghmaher.ir