How to fix ION PATHFINDER GO when the unit is not charging?
If your ION speaker isn't charging, ensure the USB-A to USB-C charging cable is properly connected to the power input, the power adapter, and the power outlet.
What to do if ION PATHFINDER GO sound is distorted?
If the sound from your ION speaker is distorted, try lowering the volume control of your sound source.
What to do if I can’t hear the microphone over the music volume on my ION PATHFINDER GO Speakers?
If you can’t hear the microphone over the music volume on your ION speaker, turn down the music volume from your source.
How to reduce bass on ION Speakers?
To reduce the bass on your ION speaker: * Adjust the tone or EQ control on your sound source to lower the bass level. * Check if the BOOM function is enabled and disable it by pressing the [TM] button.
Why do I hear a hum from my ION PATHFINDER GO when cables are connected?
If you hear a hum when cables are connected to your ION speaker: * Disconnect cables from the input jacks to see if it’s a faulty cable. * Ensure the signal cables are not placed near power cables. * Connect all audio equipment power cables to outlets which share a common ground.
Why is the audio dropping out when playing music from a Bluetooth device on my ION PATHFINDER GO Speakers?
If you experience audio dropouts while playing music via Bluetooth on your ION speaker: * If your unit is trying to link to another speaker, exit Stereo-Link[TM] mode by double-pressing the Bluetooth button. * Wait for your unit to link to another speaker if there is one within range.
General| Power Output | 50W |
|---|---|
| Water Resistance | IPX5 |
| Bluetooth | Yes |
| Built-in Microphone | Yes |
| USB Charging Port | Yes |
| Inputs | 1/8-inch (3.5mm) aux input |
| Bluetooth Range | Up to 100 ft (30.5 m) |
To Next Page
