To Next PageTo Next Page
Need help?Do you have a question about the ION TS Series and is the answer not in the manual?
General| Brand | ION |
|---|---|
| Model | TS Series |
| Category | Water Dispenser |
| Language | English |
Shows the CO2 meter for the SodaPro tank and allows usage meter reset.
Restores factory default settings and reverts to initial setup.
Provides diagnostic info including temp readings, flow rates, and error logs.
Allows customization of features like error disabling and unit settings.
Restricts access to advanced functions within the Settings Menu.
ION does not sense the Thermistor plugged in, or is reading an internal short.
ION does not sense the Thermistor plugged in, or is reading an internal short.
ION has run three (3) compressor cycles and Ice Tank Thermistor still reads higher temp.
ION sensed abnormal temperature rise in Hot Tank, indicating Heater is active without water.
Hot Tank water volume limit has been reached.
Ice Tank water volume limit has been reached.
System has lost temperature calibration.
ION is sensing internal temperature rise that indicates the Fan has failed.
Low level sensor in Carbonation Tank did not sense water after 45 seconds.
