To Next PageTo Next Page
Need help?Do you have a question about the IONPURE IP-LXM04HI-3 and is the answer not in the manual?
General| Model | IP-LXM04HI-3 |
|---|---|
| Number of Cells | 4 |
| Type | Electrodeionization (EDI) Module |
| Product Series | IONPURE |
| Operating Voltage | 200-600 V DC |
| Operating Temperature | 5-45 °C |
| Voltage | 400 VDC |
| Current | 0.5-4.0 A |
| Product Water Resistivity | ≥15 MΩ·cm |
| Resistivity of Product Water | ≥15 MΩ·cm |
Provides a brief introduction to the components and models of the LX modules.
Details crucial safety measures and precautions to prevent personal injury or equipment damage during installation.
Lists the necessary tools and equipment required for the proper installation of the LX module.
Defines the essential conditions and specifications required for the LX module to operate correctly.
Describes the procedure for checking and adjusting the torque on module tie-bar nuts to prevent damage.
Covers the electrical aspects of LX module installation, including precautions and connections.
Covers general recommendations for maintaining LX modules, including log sheets and periodic checks.
Provides specific guidelines for cleaning and sanitizing LX modules based on different circumstances.
Provides a step-by-step guide for cleaning LX modules using a 2.0% Hydrochloric Acid solution.
Explains the procedure for cleaning LX modules with a 5% brine and 1% caustic solution.
Outlines the process for cleaning or sanitizing LX modules using sodium percarbonate.
Details the procedure for sanitizing LX modules using Peracetic Acid.
Describes methods for cleaning and sanitizing LX modules using a combination of cleaning agents.
Details the procedures for safely shutting down the LX module system.
Details the minimum, nominal, and maximum product flow rates for each LX-HI module model.
