EasyManua.ls Logo

Ipevo WS-01 - Page 8

Ipevo WS-01
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Battery Tips:
Important Caution!
• Charging to full will take approximately 6 hours, or more if you are using the WS-01 while charging.
• The WS-01's 3300mAh battery will power the device for about 4 hours before requiring a charge.
• A blinking red battery/power LED means your battery is low. Please recharge your device if so.
Please do not attempt to use any power adapter other than the one included with your package.
Using a different adapter may damage the WS-01 and will void the manufacturer warranty.
7