CONNECT
PRO
Use a Cat 5 or Cat 6 cable terminated
with an RJ-45 connector to connect the
IPORT PoE+ Adapter (72102).
Connect the other end of the Cat 5 or
Cat 6 to a PoE+ Switch or PoE+ Injector.
1
Use the IPORT USB-C to molex cable
provided in the Surface Mount Systems
(70752, 70754, 70755, 70756, 70808, 70806)
and connect into the molex jack of the
PoE+ Adapter.
Connect the USB-C cable into the iPad
and complete the Surface Mount Install.
For more information on installing the
Surface Mount please reference the
instruciton included with the Surface
Mount Systems.
2
To Next Page
Need help?
General
