IPS WATER-TITE - Installation Instructions; Determine Size of Washing Machine Pan; Locate Installation Site and Drain Outlet; Drill Hole and Install PVC Adapter

Installation Instructions
Always check local codes before installation.
01
Determine size of required washing machine pan.
NOTE:Suggestedtoincludea1”to2”gaparoundpan,fromedgeofpantowashingmachine.
02
Locate installation site of washing machine pan and nd the preferred
drain outlet location.
03
Drill 1
3
/
8
” hole and install the included 1”x 1½” PVC male adapter.
NOTE: Installtheadapterandrubbersealingwasherfromtheoutsideofthepanandthenattach
thelockingnuttotheadapterthreadsfrominsidethepan.
04
Verify installation area is free of debris and pan is on a at surface.
Inspect pan for any damage before placing washing machine in pan.
05
Using two people, place the washing machine in the washing machine
pan. Be aware of the pan edges, as not to damage the pan.
06
Connect PVC piping to PVC adapter using PVC solvent cement.
PRODUCT CODE PRODUCT DESCRIPTION MODEL UPC BARCODE CUBIC FT./CASE UNITS/CASE LBS/CASE
83200 27”x 29” ID
27½”x29½”TopODPan
w/1”x1½”PVCDrain
WMP1 012181-832004 2.320 5 16
83202 28¼”x 28¼” ID
29⅛”x29⅛”TopODPan
w/1”x1½”PVCDrain
WMP2 012181-832028 2.320 5 16
83203 28”x 30” ID
ID/31”x33”TopODPan
w/1”x1½”PVCDrain
WMP3 012181-832035 2.930 5 16
83204 28¼” x 28¼” ID
ID/29⅛”x29⅛”TopODPan
w/1”x1½”PVCDrain/Bulk
WMP2B 012181-832042 Skid 75 285
DESIGNED SPECIFICALLY FOR FRONT LOAD WASHING MACHINES
83205 29”x 34” ID
31”x36”TopODPan
w/1”x1½”PVCDrain
WMP4 012181-832059 3.0 5 17
WT025