Putting on the iReliev™ Conductive Back Wrap
1.) Before putting on the Conductive Back Wrap, remove any residue on skin, cream or
ointment. Make sure that your skin is clean and free of oil.
Do not place the wrap on injured or inamed areas of the skin, such as wounds, sores,
rashes or reddening.
2.) Before use, dampen the integrated silicon electrodes with water.
3.) Position the electrode pads on the area of the body to be treated. If your back aches at
waist level; you are suffering from pain in the upper treatment area. Position the wrap
so that the middle of the wrap is at waist level.
8
To Next Page
Loading...